Pattern Menus: Routing by the Digits the Caller Dials

A pattern menu plays a message to the caller, collects digits from them, and routes the call by matching them against the patterns you defined. The classic example: "Enter your ID number", and each bochur goes straight to his own voicemail box, with no operator and no menu of nine options.

1

What is a pattern menu

A regular IVR menu says "Press 1 for Sales, 2 for Service". It is good for a few options. A pattern menu is built for the opposite case: hundreds or thousands of destinations, each reached by dialing its own sequence of digits.

The caller goes through three steps:

  1. They hear the message you uploaded ("Enter your ID number").
  2. They dial digits. Dialing ends when they reach the maximum number of digits you set, or when they press the pound key (#).
  3. The system looks for a pattern that matches what was dialed and transfers the call to that pattern's destination.
Examples: dialing a voicemail box by ID number in a yeshiva; a personal code for each employee that routes to his extension; an order number that routes to the department handling it.

General background and a comparison with a regular menu — What is a pattern menu and What is a voice menu (IVR) in the Knowledge Center.

2

Creating a menu

In the New pattern menu card, click Add menu, give it a name (for example: "Dial by ID number") and a description, and click create. The menu is created empty, and its management screen opens right away — that is where you continue setting it up.

3

Menu settings

Clicking Manage Menu opens the full screen. At the top are the settings:

  • Name and description: for your own identification only. The caller does not hear them.
  • Maximum digits to collect: after how many digits the dialing closes by itself. If all your codes are 9 digits long (ID number), enter 9, and dialing ends right after the ninth digit, with no unnecessary wait.
  • Dialing timeout: how many seconds to wait for the caller. ‎-1‎ = no limit.

After a change, click Save Settings.

4

Played messages

The menu has three messages, each set separately:

  • Request to enter digits — what the caller hears on reaching the menu, before entering digits.
  • Invalid entry — Played after an entry that matched no pattern, or when the wait time passed with no entry.
  • Goodbye message — Played after several failed attempts, before the call disconnects.

For each message, upload an audio file (your own recording) with the Upload audio file — button — the system converts any common format by itself — or pick an existing file with the Choose from the sound library button. You can listen, download, replace and delete.

Without a message, the caller hears silence and does not know what they are expected to dial. Always upload a message that explains exactly what to dial.
5

Routing patterns

Each row in the patterns table says: "If this was dialed, route there". You add a pattern in the form below the table:

  • The digits the caller dials: the sequence that has to match. Empty = any input at all (good as a "default" pattern with the last priority).
  • Match type: see the next section.
  • Priority: which one is checked first when several patterns match.
  • Where the input is routed: the destination. An extension, voicemail box, queue, hunt group, external number, or any destination that exists in the system.

In the table, next to each pattern: Edit (opens it in the form) and Delete (a second click confirms).

6

Match types and priority

  • Exact match: the input must be exactly the sequence you defined. This is the usual type, and almost always the right one.
  • Contains: it is enough that the sequence you defined appears somewhere in the input.
  • Regular expression: for advanced users only. A flexible pattern following regex rules. If you are not sure, do not use it.

Priority: when one input matches several patterns, the one with the lower number wins (1 is checked first). For an "empty = everything" pattern, always set priority 10 so that it is checked last. Otherwise it will catch every input.

7

How a call reaches the menu

A pattern menu is a destination like any other. Wherever you choose a destination (an incoming number, an option in an IVR menu, a destination of a routing code), choose the destination type "Pattern Menu" and then the menu you created. A common combination: in the main menu, "Press 3 to dial by ID number", and option 3 leads to this menu.

8

Deleting

In the menu's card on the main screen, click Delete, then click a second time to confirm. Deleting removes the menu and all of its patterns. Calls routed to it from other places will be left without a destination, so update those first.

9

Permissions

  • Pattern Menus, View: to see the screen.
  • Pattern Menus, Create: to add a new menu.
  • Pattern Menus, Edit: to change settings, patterns and the message.
  • Pattern Menus, Delete: to delete a menu.

Someone who was given only some of the permissions will see only the matching buttons.

Stuck? Does something on the screen not behave like in the guide? Write to us through the Contact Us page. We'll be glad to help, and also to hear what's missing from the guide.